 |
|
|
|
|
|
|
|
|
|
 |
|
||||||||
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
 |
 |
 |
 |
|
|||||
S T R E T C H.........CV Boot Fitting Instructions
|
|
 |
 |
| 1. Jack up the vehicle, remove the road wheel and hub. Remove the old boot and clips. |
2. Clean away any grease or debris from the shaft and joint |
 |
 |
| 3. Check fitting cone for sharp or rough areas. Smooth with emery cloth if necessary. Spray outer with cone spray. |
4. If fitting the new boot to an outer CV joint, turn the boot inside out. (this will almost always be the case) |
 |
 |
| 5. Spray the inside of the boot with cone spray. |
6. Place the large end of the boot over the narrow end of the cone. |
 |
 |
| 7. Place the large end of the cone over the joint. |
8. Push the boot until it is clear of the cone. |
 |
 |
| 9. Remove the cone and turn the boot right side out - if necessary. |
10. Snip the corner of the grease sachet and fill the joint. |
 |
 |
| 11. Slide and stretch the boot into position over the joint. |
12. Secure the boot with fixing clips, removing any excess with tin snips. Replace the hub and road wheel. |
 Continental Direct Boot LubeBoot lube is specifically formulated for use with £1.60 + vat
|
|